Anping Yonglv Wire Mesh Co.,Ltd

Filter performance characteristics

Feb 21,2026

1001

Leave a message

1. Efficient and precise filtration: The special structure of the filter disc filtration technology has precise and sensitive performance, ensuring that only particles smaller than the required size can enter the system. It is the most effective filtration system; specifications include 5μ, 10μ, 20μ, 55μ, 100μ, There are various types such as 130μ, 200μ, etc. Users can choose filter discs of different precisions according to water requirements. System flow can be flexibly adjusted as needed.
2. Standard modularization, saving space: The system is based on a standard disc filter unit and is designed according to modularity. Users can choose according to their needs, which is flexible and interchangeable. The system is compact and occupies a very small area. It can flexibly use corner space for installation. For example, an equipment with a water treatment capacity of about 300m3/h only occupies about 6m2 (general water quality, filtration level 100μ).
3. Fully automatic operation, continuous water discharge: Between each unit in the filter combination, the backwash process takes turns, and automatic switching between working and backwash states ensures continuous water discharge; backwash water consumption is very small, only Accounting for 0.5% of the water output; if equipped with air-assisted backwashing, the self-consumption water can be reduced to less than 0.2%. High-speed and thorough backwashing can be completed in just tens of seconds
4. Long life: The new plastic filter element is strong, has no wear, no corrosion, and very little scaling. It has been verified by many years of industrial practice and has no wear and tear or aging after 6 to 10 years of use. The filtering and backwashing effects will not change due to use. Worse over time.
5. High quality and low maintenance: The products comply with the corresponding quality standards. All products are tested and tested under simulated working conditions before leaving the factory. No special tools are required and there are few parts. They are easy to use and require only regular inspections and almost no maintenance. Requires routine maintenance.